Furnace Thermostat Wire Diagram

sbradizzare want your samsung s5600halley (themes etc)

• here and how do you follow everything to the letter .....
• x scaicate the first firmware and multiloder now do what you diko ke ...
• 1. Charge your phone battery;
• 2. In the meantime, get the program MultiLoader_V5.56.
• 3. Get the firmware for Western Europe (installed on the PC program " New Samsung PC Studio" (this only serves to load the correct USB drivers and make sure the phone connects to the PC);
• 4. reboot the PC after program installation (otherwise you risk that your phone is not recognized);
• 5. connect the phone to the PC through the special cable supplied, "New Samsung PC Studio" should recognize the phone;
• 6. close "New Samsung PC Studio" and remove the icon from the system tray (right mouse button on the icon near the clock) and disconnect the phone from the PC;
• 7. close antivirus / antispyware and other programs that could affect the outcome of operations;
• 8. remove the SIM card and any MicroSD by telephone
• 9. unzip the two files containing MultiLoader and firmware;
• 10. initiated MultiLoader;
• 11. select "MSM6275/MSM6280/MSM6290" (codes used to identify the type of modem chip that is used to connect the phone to MultiLoader)
• 12. check the box for "Full Download" (ie, we do it again the phone);
• 13. click on "Boot" and select the folder "BOOTFILES" (which contains the files for the initial boot) in the folder where you previously extracted the firmware (check the box to the left then right of the button "Boot");
• 14. press the button "AMSS" and select the file "amss_compressed.bin" (containing files for common modem) (left then check the box to the right of the button "AMSS");
• 15. press the button "Rsrc1" and select the file "Rsrc_S5600_Open_Europe .... rc1" (containing the application files) (let then check the box to the right of the button "Rsrc1");
• 16. press the button "Rsrc2" and select the file "Rsrc2_S5600 (Low). rc2" (containing the files for the animations on and off the phone) (let then check the box to the right of the button "Rsrc2");
• 17. click on "Factory FS" and select the file "FactoryFs_S5600_Open_Europe .... ffs" (containing the files and programs that provide basic system) (let then check the box to the right of the button "Factory FS");
• 18. connect the phone, switched on the PC using a cable (no need to press any key combination on the phone);
• 19. click on "Search Port" after a while, if the connection is successful, the program will report, below, the number of COM port used and the message "Ready -
• 20. if you are like the Ready program then press the button "Download" and wait for it to load the new firmware it is important not to touch the phone to avoid disconnections, on the right of the screen the program will find a log of the progress of the work (all should last no more than ten minutes )
• 21. if for some reason something does go wrong (especially in times when they log on to the right is the word "Wait reset!) no problem: unplug the phone, remove the battery (since they will not be able to switch it off), replace the battery , While holding down the volume down key + unlock + camera press the power button (probably a screen on a black background with a blue border and red letters), connect the phone to the PC with the cable, wait a second, press the button "Add Port" and, when ready press "Download": now you should see the progress log and phone Yellow progress bars;
• 22. the process is terminated when the log shows "All files complets" or similar * 2767 * 3855 #
• 23. reassembled SIM , any MicroSD and turn on the phone: when you first turn the phone to configure itself with the right profile for WAP, MMS and Internet.